#
# フロアごとに異なる無線グループを配布 : WLX402 Web GUI設定
#

#
# WLX402(3)
#

system name (WLX402(3)の名称)
vlan-port-mode lan1:1 hybrid
vlan-port-mode lan1:2 trunk
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address 192.168.100.243/24
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
 airlink channel range 1 6
 airlink transmit power level 1
 airlink max client 10
airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink channel range 36 52 100 116
 airlink channel range dfs 36 52 100 116
 airlink transmit power level 1
 airlink max client 10
airlink enable module2
airlink select 1
 airlink ssid Develop
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-eap aes
 airlink radius auth on
 airlink radius auth port 1812
 airlink radius account off
 airlink radius server 192.168.100.241
 airlink radius secret (シークレット)
 airlink radius secondary auth on
 airlink radius secondary auth port 1812
 airlink radius secondary server 192.168.100.242
 airlink radius secondary secret (シークレット)
airlink enable 1
schedule at 1 startup * ntpdate ntp.nict.jp syslog
schedule at 2 startup airlink module1 airlink channel change station-none exclude=none wait-time=5
schedule at 3 startup airlink module2 airlink channel change station-none exclude=none
httpd host any
rt-coop use on
wlan-controller host (WLX402(1)のMACアドレス) (WLX402(2)のMACアドレス)
wlan-controller host ip address 192.168.100.241
wlan-controller bind vlan auto